Fire Detection Systems
Nurse Call Systems
Attendant Call Systems
Disabled Call Systems
Emergency Evacuation Lighting
C-1000-1616 Zone Conventional Fire Alarm Panel
C-1000-16 Conventional Fire Panels are designed and developed with 4-zone 8-zone 16-zone smd Circuit Board application. Fire or fault information in the system is displayed on the panel on a regional basis. The building where the system is installed is divided into sections. This partition can be made on the basis of floors or buildings. The cable installation in the system is made according to the number of zones to be created. Up to 20 detectors can be connected to each zone. Fire alarm buttons can be used as many times as desired. Sounder cable is pulled separately from the panel. Cable pulling in the system, creation of zones, placement of the elements to be used in the system are done as shown in the diagram below. They are conventional system fire alarm control panels that offer economical solutions for small-scale applications, have a modern appearance and are produced with surface mounting technology production technique.
TECNICHAL AND BASIC FEATURES
• Design and Test in EN54-2-4 Standards
• With Membrane Panel
• Alarm and Error LED for Each Zone
• 24V Battery Capacity
• Alarm and Fault Relay Outputs
• External 24Vdc Supply Output
• Safe and Fast Communication
• Ground Fault Detection
• Mains and Battery Error Alerts
• Evacuation Switch
• Keypad Lock
• Ability to Disable Suspects
• Testing with a Single Person
• Compatible with all Conventional detection and
warning devices
• Repeat Panel Connection
• Ability to Test the Regions
• Day and Night Mode
• Ability to Check All Error Codes
• Ability to activate the Sirens with the Evacuation Button
• Surface Mounting
• Silencing the Sirens with the Silent Button
• Detection Zone Number 4,8, 16
• Smoke Heat Flame Detector that can be connected to
1 Zone 20 Pieces
• Gas and Beam Detectors that can be connected to
1 Zone Unlimited
• The Number of Buttons That Can Be Connected to
1 Zone is Unlimited
• Panel Feed: 220 (+ - 10%) VAC 50/60 Hz
• Operating Voltage: 24 VDC
• Working Temperature: -10°C to +50°C ( 95% Humidity)
• Protection Class: iP 30
• Application Area: Indoor use
• Battery: 2 pieces 12VDC 4Amph.
• Battery Charge Current: 0.5 MA
